Password Breaking procedure on Maipu Router

Maipu Password Breaking Document 

Step 1

Connect router by console port, Power on the Router.

Step 2

Press “n” key continually till you finish full booting process. 

Step 3

Now you will be in user mode, then go to privilege mode by giving enable command

router>enable – User Mode

router# -- Privilege Mode 

Step 4

Go to filesystem & In Filesystem mode, perform config-file startup

router#filesystem – go to filesystem mode

router(config-fs)#dir – To view the files in file system

router(config-fs)#config-file /flash/startup – copy the configuration file

After this you will see old configuration loaded on router. You can do changes in Username and password as required. 

Step 5

Configure User name , password credentials in Configure mode

configure

enable secret <passwd>

username <usrname> privilege 15 secret <passwd> 

::::::::::::::::::::::::::::::::::::::::::::::::::: SCREEN OUTPUT:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Monitor version 3.32 is Booting (press ctrl+c to enter monitor mode) .....

Now start loading system and application programs,

Loading system and application programs, please wait for a while...

n

Use boot parameter 0:

device=flash, filename=/flash/rpl-c-6.1.25(REL).bin

Loading file /flash/rpl-c-6.1.25(REL).bin ...

nnnnnnnnnnnnnnnnnnnnnUncompressing MPROS image n###n##n##n##n##n##n##n##n##n##n##n##n###n##n###n##n#

##n##n##n###n##n#n###n##n###n##n##n##n##n##n##n###n##n##n##n###n###n##n#n#n##n##n##n###n#n###n###n##

n#n###n###n##n###n###n##n##n###n##n##n##n##n##n##n###n#n##n###n##n###n###n##n###n###n##n###n##n##n##

#n###n##n##n###n##n###n##n###n###n##n###n##n###n###n#n#n##n#n#n##n#n#n#n##n#n##n#n#n##n#n##n##n#n##n

#n## OK

Starting at 0x200020...

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

MyPower (R) Operating System Software

MP801E system image file (flash0: /flash/rpl-c-6.1.25(REL).bin), version 6.1.25(REL)(integrity), Com

piled on Nov 14 2008, 19:02:51

Copyright (C) 1999 Maipu (Sichuan) Communication Technology Co., Ltd. All Rights Reserved.

System ID : 00017a0c0648

Hardware Model : MPC880 with 64 MBytes SDRAM, 8 MBytes flash

Hardware Version : 050

MPU CPLD Version : 004

Monitor Version : 3.32

Software Version : 6.1.25(REL)(integrity)

Software Image File : flash0: /flash/rpl-c-6.1.25(REL).bin

Compiled : Nov 14 2008, 19:02:51

nnn

mount flash file system on dev '/flash' success.

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

AAT&FE0S0=0 nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

n

00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface lo0, changed state to up

00:00:23: %LINEPROTO-5-UPDOWN: Line protocol on Interface null0, changed state to upnnnnnnnnnnnnnnnn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

Press any key to start the shell!

00:00:37: %SYS-5-START: System startednnnnnnnnnnnnnnn

router>

router>

router>en

router#fil

router#filesystem

router(config-fs)#dir

size date time name

-------- ------ ------ --------

6047257 JAN-01-1980 00:04:06 rpl-c-6.1.25(REL).bin

2048 JAN-01-1980 00:00:36 mpssh

9041 JAN-01-1980 00:00:38 logging

10224 JAN-01-1980 00:00:46 history

670 JAN-01-1980 00:01:42 startup

2048 JAN-01-1980 00:01:42 rollback

router(config-fs)#confi

router(config-fs)#config-file ?

Appointed file name,such as "/flash/startup"

router(config-fs)#config-file /flash/startup

MAIPU(config-fs)#

MAIPU(config-fs)#

MAIPU(config-fs)#